What Is Included In A Natural Gas Furnace Tune-Up?

Gas furnace companies highly emphasize yearly tune-ups, and so, there are several furnace tune-up companies that were founded resultantly. Furnace tune-ups are important to get done at least once a year, especially when winter starts. It ensures superb performance during the entire cold season. Even if you love chilly winds, you will not appreciate a broken furnace or a slow heating furnace for more than a few hours.

Why Tune-Up a Furnace?

There are a number of reasons that render surface tune-up as highly important. A yearly furnace tune-up saves you from a lot of problems in the long run. Following are the top 5 reasons to get a gas furnace tune-up:
1. Optimum performance
In order to ensure optimum performance, furnace tune-ups are really important. One main reason why gas furnaces perform slowly is restricted airflow. When the gas furnace does not receive enough airflow, its performance is below average.

During a furnace tune-up, the technician checks for the airflow and ensures that the furnace is getting proper airflow.

furnace,cleaning, furnace repairs, furnace services


2. Timely repairs
Furnace tune-up saves you from any major issue and repairs it beforehand. A furnace tune-up does not only cleans up your furnace but identifies small failures that might become bigger problems and costly mechanical repairs later on.
3. Improves efficiency
As gas furnace tune-ups include cleaning and complete inspection, it improves the efficiency of your gas furnace. This ensures that the furnace keeps running really well all winter without any issues.
4. Ensures safety
A furnace tune-up adds to the safety of the furnace as well as yours. As gas furnace uses gas to produce heat, the combustion process can result in leaking dangerous gases such as carbon monoxide in your home. A furnace tune-up eliminates all such chances and keeps you and your family safe and healthy.
5. Maintains warranty
In order to add up to the years of warranty, maintenance matters a lot. That’s what a gas furnace tune-up is all about!
Furnace Tune-Up Checklist
While getting a furnace tune-up, you need to have a checklist. This ensures that the furnace is tuned up well enough. Following is what’s included in a furnace tune-up:
Check 1. Cleaning the furnace.
The very first thing is cleaning the furnace. Over time, the outdoor unit, blower, and duct get dusty and dirty. Cleaning such parts is important for peak performance of the furnace. To do so, a vacuum and clean cloth can be used.
To clean the ignitor, using sandpaper is a good option.
Check 2. Cleaning or changing the filter.
Filter is the next check you need to make. See if the filter will work well enough only if cleaned or it needs a replacement. A dirty filter pollutes the air, puts a strain on the furnace, and can lead to mechanical damage.
Check 3. Testing the ignitor.
Ignitor wears out over time. When so happens, it eventually stops working. Therefore, a furnace tune-up necessarily includes ignitor testing. This ensures you face no problems turning your furnace on or off.
Check 4. Adjusting pilot and burner.
If your gas furnace still uses a pilot ignition, the technician will surely adjust it to an average height.
Adjusting the burners is also included in a furnace tune-up as it is important to have the burners at the maximum efficiency level.
Check 5. Checking gas pressure and airflow.
Gas pressure and airflow add a lot to the performance of your gas furnace. With reduced gas pressure or restricted airflow, a gas furnace does not perform optimally. With safe and cleaned burners and duct, gas pressure and airflow are brought back to normal.
Check 6. Inspecting leaks.
For gas furnaces, leak inspection is an essential part of furnace tune-ups. It ensures that the gas does not leak from anywhere. This reduces the chances of indoor air pollution and health hazards, as well as the overuse of fuel and extra fuel costs.
Also, the duct must be checked for leaks as well as not only gas, but heat can also be lost due to leaks. A leaking duct can result in 30% of heat loss. A timely inspection can repair any such leaking points so that the heat is retained.
Check 7. Lubricating and setting.
Lubricating the motor of furnace is also a part of a furnace tune-up to ensure it does not dry up. Though newer models usually come with self-lubricating motors, you need to check if your gas furnace does so or not.
Once done, set back all the removed parts of the furnace and turn the furnace on. Give it at least a single heat cycle to ensure it performs well.
If you get your gas furnace tuned up from a professional, make sure he does all of these tasks properly.

Furnace Tune-Up Pricing
A gas furnace tune-up does not cost a lot. There are a few simple tasks such as cleaning and changing the filter, which you can do on your own as well. Changing a furnace filter takes $10 to $30 only.
A professional gas furnace tune-up costs about $100 to $250. The cost usually depends on different factors such as:
• Location
• Time of the year (winters or summers)
• Since when you get your last tune-up
• Any repairs or mechanical failures
If it is just cleaning and inspection, a furnace tune-up costs less, but if any repairs are needed, the costs add up accordingly.

Furnace Tune-Up Companies
There is a lot of furnace tune-up companies out here. In order to find the best one, you need to try different ones out in your area. However, if you do not have enough time, asking a friend or family member for recommendations helps find a well-reputed furnace tune-up company.
Different companies offer different furnace tune-up pricing. Make sure your furnace is well tuned at a reasonable cost.